What Is The Procedure To Perform The HP OfficeJet Pro 9025 Printer Setup?

Performing the setup of the HP OfficeJet Pro 9025 printer is quite easy. Do read and follow the below steps one-by-one. You will need firm internet connectivity for performing the setup.

1. To start with, ensure that you have strong signal strength.
2. Then unpack the printer.
3. Secondly, remove all the tapes and packaging materials from the printer.
4. Link the printer to a power outlet and turn ON.
5. Then load the ink cartridge into the ink cartridge access door.
6. Nextly, in the main input tray, load a stack of plain white paper.
7. Ensure that the paper does not get crushed while inserting it into the input tray.
8. Take a few seconds to insert the sheets inside the tray until it stops.
9. Be careful with this step and avoid jamming of the paper while printing.
10. Make sure the printer is near to your system and the router.

What Are The Steps To Perform The Wireless Setup For Your Printer?

Once you complete the basic configuration of your printer, perform the wireless setup. You can connect your printer to your wifi network by proceeding with the below-given instructions.

1. Choose your preferred settings to connect your printer to the network.
2. Visit the control panel of your printer and choose the wireless settings option.
3. Read and follow the on-screen instructions carefully.
4. Perform the wireless setup wizard steps one-by-one.

Note: In addition, you can use the Auto wireless connect feature. You can enable it if it is compatible with your printer. Finally, proceed with the instructions that appear on the screen.

How Will You Download the HP OfficeJet Pro 9025 Driver Software?

After you complete the setting up of the printer, start the driver download process.

1. To start with, visit the HP website.
2. Nextly, click the printers tab and search for your printer model.
3. Now, a list of available drivers will appear on the screen.
4. Choose the latest driver that is compatible with your device.
5. Click the download link or download option that is present near the driver.

Download Driver

The download of the printer software will begin now. Wait for a few minutes, so that the printer’s software download gets completed.

What Are The Guidelines To Perform A HP OfficeJet Pro 9025 Printer’s Scanner Setup?

Looking for the right steps to complete the scanner setup of your HP OfficeJet pro 9025 printer? Then follow the below-given steps.

1. Initially, ensure that you have installed the printer software that is compatible with your device.
2. Secondly, make sure that your system and the printer is in connection with your wi-fi network.
3. Then you can choose the HP scan option.
4. Now, place the appropriate document that you want to scan on the scanner lid.
5. Nextly, close the scanner bed.
6. Then click the scan button.
7. Now you will have to choose your device.
8. Your device will open the scanned copy of the corresponding document after the scan is complete.
9. You can save the document either as a PDF file or as JPEG.

You also have the facility to scan multiple documents as a single PDF file. In addition, you can save the scanned documents to your email.

How Will You Do A HP OfficeJet 9025 Fax Setup?

The fax setup for the printer can be done successfully by proceeding with the below guidelines.

(Note: This method uses the landline telephone service.)

1. To start with, you will have to link the phone cord with the phone wall jack.
2. Nextly, connect the 1-line jack at the backside of your HP printer.
3. Then perform the setup of the fax settings.
4. On the printer control panel, navigate to the fax/ setup menu and perform the appropriate settings that are necessary.
5. Finally, perform a quick fax test in order to confirm whether the fax setup you made for your printer is successful or not.

What Is The Reason For My HP Printer To Go Offline?

1. The reason behind the HP printer showing offline status in the printer’s control panel is due to the improper connection between your printer to your network. In addition, you will have to connect your system to your wi-fi network properly.
2. Also, visit the settings.
3. Choose the printers option.
4. Nextly, right-click on the printer icon.
5. Finally, choose the “use printer online” option

For further assistance and clarification about how to perform the HP OfficeJet pro 9025 printer setup, call our customer support team anytime.