HP Tango X Smart Wireless Printer Setup and Driver Installation

How Can I Setup and Install the HP Tango X Printer?

1. The HP Tango X Smart Wireless printer is the first home printer and can print from anywhere
2. Moreover, this printer is voice-activated and can print with Alexa, Google Home, and Microsoft Cortana
3. Similarly, you can print from the cloud and social media and scan using your Android camera
4. HP Tango X Smart Wireless printer, prints professional-quality prints and it has some unique ability to scan and copy
5. After that, the printer speed of this printer for a five-page text document in 30.8 seconds
6. To make a color copy on the Android phone, it just takes 17.30 seconds
7. Likewise, HP Tango X printer setup is effortless and simple and here are the guidelines for its initial setup

How to Unwrap the HP Tango X Smart Wireless Printer?

Here is some simple guidance for you to set up the HP Tango X Smart Wireless printer.

1. Firstly, peel off the tape or cut the tape to open the package of the HP Tango X Smart Wireless printer
2. Now, fold its flap and then remove the printer holding its styrofoam tapes at its sides
3. Carefully, place the printer on a flat surface and then remove the overprotective cover Moreover, make sure to clear off all the packaging materials like the cardboard boxes and the tapes on inside and outside the printer
4. Finally, check for the attachments that must come along the HP printer
5. And this is the basic guidelines for HP Tango X printer setup

What are the attachments for HP Tango X Smart Wireless printer?

1. First-time printer setup guide
2. Reference manual
3. Power cable
4. Ink cartridges

How to Power Up My HP Tango X Smart Wireless printer?

1. At first, you have to link one end of the power connector to the back of the printer
2. And link the other end to the power outlet at home
3. Similarly, turn on the printer by press the power button

How can I Load the Paper into My HP Tango Smart Wireless Printer?

1. Firstly, you must slide the paper width guides to the edges of the input tray
2. After that, fan a stack of white paper and then insert it into the input tray
3. And then slide the paper width guides until they could touch the paper edges

How can I Insert the Ink Cartridges into their slots?

1. At first, gently hold down the ink door button to release the ink cartridge door and lift the door until it becomes idle
2. After that, you must wait for the carriage movement to stop
3. Next, carefully unpack the new ink cartridges from its package and then remove its plastic from its ink cartridge
4. Now, load the ink cartridges into its slot and then press it to lock in its place
5. Moreover, repeat the above steps for other cartridges
6. Similarly, lower the ink cartridges access door and genuinely press it to lock in its place
7. Finally, after the installation of the ink cartridges, the printer will print the alignment page
8. And this can complete the initial stage of HP Tango X printer setup

How to Link My HP Tango X printer to a Wireless Setup?

1. This is one of the most significant process during HP Tango X printer setup
2. Moreover, you can make use of the HP Smart app to link the printer to the wireless network
3. After that, on your computer download and install the HP Smart app from the Microsoft store
4. Likewise at the rear of the printer, long-press the Wireless button for about 5 seconds
5. And now the Edge lightning will flash blue
6. Secondly, access to your computer, launch the HP Smart app and then click the Printer icon
7. On the other hand, click Setup a New Printer and then choose Continue
8. Most importantly, the HP Smart app looks for the wireless network
9. Thirdly, choose your printer and then click Continue
10. Once after prompting, enter the WEP or WPA key
11. Finally, once after the printer links to the wireless network, click Continue and click Exit setup

How to download and install HP Tango X Driver

1. At first, you can download the HP site
2. Moreover, enter the name of the printer model of your HP Tango printer
3. After that, in the next page, choose your operating system and its current version
4. Next, check for the driver file information and click the Download button
5. Secondly, choose a location to save the file and start with the installation
6. Finally, double-click the driver file and run it to start up with the print job

Download Driver

How to Setup the HP Tango X Scan?

1. Firstly, Download the HP Smart app from Microsoft Store
2. After that, access it to start with the scanning process
3. Next, choose Scan and then select Camera
4. Secondly, place the document on the front camera and click the Round button to take an image
5. Moreover, you have to adjust the boundaries if you want and then click Apply
6. Modify the settings and choose the file type that you wish
7. Finally, click the Save or Share icon to share it with others

If you have any inquiries or require more knowledge about HP Tango X Printer setup, feel free to contact our professional expert team for their assistance.